Guide - How to forwards ports on D-LINK 6850u

Guide - How to forwards ports on D-LINK 6850u

My name is Tomer, And i have a Youtube Channel about Router Guides and etc:

 Link for the channel:

(Click Here)

So what do we need to do?

1.  Open the Start Menu:

                             

 And then open it:

Write in the CMD: ipconfig and press Enter.

After that you will see yours Router Default Gateway. ( Leave the CMD open we will use it again later ) 

for me it's : 10.0.0.137, For you probably it will be : 10.0.0.138

2. Go to your Browser ( Google Chrome, Firefox, Internet Explorer and etc )

Copy the Defualt Gateway and search, It will take you to that page:

After you are logged in, Go to  STATUS:

And then click on DHCP Clients:

As you can see the Hostname "Tomer" ( My pc ) All what we need to do is to copy the MAC Address and the IP Adress.

 And then go to

 Setup ----> Local Network:

 And then press on "Add Entries"

 And then you need to fill the information that we copied in the above steps:

Mac Address and IP Address:

And then click on Apply.

3.  Go to the Start Menu again and search : Network Connections.

and click on View Network Connections.

Select yours Network Device for me it Ethernet:

And then right click on it and choose Properties.

 Scroll down to the option: Internet Protocol Version 4(TCP/IPv4)

Select it and Click on Properties:

 Fill the Information from the CMD Window ( From the above steps )

Like that: 

And then go back to the Router's Page.

And go to ADVANCED ---> Port Forwarding.

Click on Add and then it will take you to that page:

External Port Start: The start of the ports range.

For Example: If you need to open the ports, 1-200

In the start function you will fill: 1

External Port End: The end of the ports range.

On the Example above you will fill : 200

Protocol: The type of the port ( TCP, UDP, or both of them UDP/TCP )

Server IP Address: Like we did before that same one, By that the router knows to which device to open the ports

 Use Interface: All you need to know is on what Interface yours Router is using.

How to know that:

Go to STATUS ---->  WAN Info: 

Here you need to check the IPv4 Address and to see if it is the same as your public IP.

( Check here: www.whatismyip.com )

After filling all the information that you had to, Like that for Example: 

Click Apply.

And thats all for that Guide by TomerGuides.